Kneading, pressing, sliding, and restraint, pressing, rolling, and panning, pressing and kneading, rolling and rolling, and sliding. When pressing the banhu, the fingertips should be placed slightly inward, and the fullest part of the abdominal muscles should be reserved. The fingers should not be raised too high, and the joints should not collapse. In this way, the pressing fingers are m...

As the saying goes, a year of flute and two years, and Hu Xian did not listen to three years. It is not difficult to see that learning erhu or board is simple, but it is not a matter of overnight learning. After the kung fu, the kung fu is naturally achieved. The instrument of Banhu roughly emerged in the late Ming and early Qing dynasties. It has a history of more than 300 ...

The method for determining the height of the Henan Opera Banhu is the same as that of the Erhu. Once the weight is determined, there is no need to adjust it if there is no special need in use. To determine the kilogram, you need to grasp two dimensions: 1. The weight is at the position of the piano bar. The usual practice is that the user's left elbow is placed on the piano barrel, ...

Banhu, a kind of stringed instrument, has a history of more than 300 years in China, and has various names, such as Qinhu, Huhu, Bangzihu, Daxian, etc. The timbre is high, firm, and has strong penetrating power. It is the main accompaniment instrument for northern opera and rap, and can also be used for ensemble and solo. The size of the banhu is: the mahogany burden is 63 c...

Banhus vary from region to region and have different tunings. Banhu is divided into high and low. Among them, there are fourths and fifths. Generally, pure fifths are more suitable for bands. Banhu tuning is more common with a perfect fifth, which is an octave higher than the regular tuning of the erhu. That is, it is more common to set the inner chord as d2 and the outer chord as a2. ...

Introduce five commonly used tunings: The five common tunings are 15, 52, 63, 37, and 26 strings. Among them, the two tunings of 15 and 52 are usually called basic tunings, which belong to the pressing method and are widely used. The other three tunings belong to the tangent method. The original position press tone refers to the first position including the two open string notes that can ...

Banhu is a characteristic national musical instrument and plays a very important role in the band. The main reason is that Banhu is a high music instrument. It has a special sound and unique personality. It plays a leading role in the band. Learning Banhu is the same as learning erhu. You must start from the most basic, starting from sitting posture, holding the piano, and h...

Erhu originated in the Tang Taizu period and has been recorded for thousands of years. It was originally a characteristic musical instrument of local ethnic groups, and later it was introduced to the central government and spread. Banhu has a history of more than 300 years in China, and its name is derived from the fact that the qin barrel is made of thin wooden boards. What are the specific di...

对一个秦腔板胡演奏者来说，操琴风度的优雅，拉琴姿态的大气是有必要讲究的．秦腔板胡的演奏姿势一般分为“平腿式”和“架腿式”两种，这两种姿势的区别在于下肢的位置。 "Flat Legs" Sit down with your legs naturally apart, your left foot is slightly forward, your right foot is back, and the banhu is placed slightly outside the bend of your left thigh. The advantage of this position (or the inner third of the thigh) is that the center of gravity of the whole body is lo...

Protecting the musical instrument provides a basic guarantee for the player's performance, prolongs the life of the banhu, and cultivates a good habit of caring for the musical instrument. The following little common sense about the maintenance of banhu will be helpful to the performer. Regarding the maintenance of banhu, you should pay attention to the following points: 1. Aft...